Phase 13 · 1 Jan 2025 tot 19 Sept 2026 · 6 posts

13 Hammock cranes

Filter

Jump to year or phasePhase 1 Keel and bulkheads2 Planking the gun deck3 Hull planking4 Stern and quarter galleries5 Coppering6 Mouldings, head and rudder7 Fitting out the gun deck8 Guns9 Planking the upper deck10 Rails and capstan11 Ship's wheel and binnacle12 Upper deck guns13 Hammock cranes All posts

January 2025

1 January 2025Hammock cranes4 photos

The dog ate the drawings

The hammock cranes from the kit are nearly all broken, and the dog has eaten sheet 3 and sheet 5, with the belaying plan.

Problem and fix
2 January 2025Hammock cranes1 photos

Emailing Cornwall and the cavel cleats

On Piet's advice I ask Cornwall Model Boats for new drawings, and in the meantime I make the cavel cleats so that a rope can actually be belayed to them.

Problem and fix Help from pietsan, Backer64.
8 January 2025Hammock cranes4 photos

Hammock cranes from tube

New hammock cranes from 1 mm tube bent round a wooden jig, with a small ring set into the filed-open end; flat or round rings is still the question.

How-to Problem and fix

September 2025

5 September 2025Hammock cranes4 photos

Cranes on, netting from the kitchen fly screen

The home-made hammock cranes are on, the netting comes from the kitchen fly screen and the first hammock is a roll of cloth measuring 4 by 3 cm, coloured in rooibos tea.

Milestone How-to
21 September 2025Hammock cranes4 photos and a video

All the nettings secured, now the two hundred hammocks

The nettings are attached to the horizontal rope with a small whipping and a loop, and with a strip of wood holding seven pins I roll and bind the hammocks.

Milestone How-to Problem and fix

September 2026

19 September 2026Hammock cranes7 photos and a video

All 190 hammocks in line

After a year of rolling and binding, all 190 hammocks are in the nettings; at ten minutes each it was quite a job, and the hammock cranes are finished with it.

Milestone